Hi all, a quick question regarding the floor construction in a 2005 Itasca Sundancer 430V Class C.
After suffering with the silly design of the forward dinette seat vs. the reclining limitations of the passenger, copilot, seating I decided to move the forward seating aft 3" to allow the passenger seat to actually recline.
I assume the floor to be a top and bottom plywood layer with foam sandwiched between. Just wanting to be sure before I drill new pilot holes and reinstall the fasteners for the dinette seating.
Also I'll need to drill and reinstall the fasteners in new locations on the passenger side, exterior wall panel. Looking at the schematics I can find online there doesn't appear to be any 12V or 110V wiring running in the wall adjacent to the dinette area below the front, passenger side window.
Any help would be appreciated.
Linear Mode
