Bedroom slide not working 2003 Adventurer 38

[spotpatch]

liv. rm slide and jacks work good, but bedrm. slide won't retract. checking everything i can, batteries have full charge can't find any tripped breakers. one thing i did find, on the hyd. pump solinoid area, there are 3 fuses, one is a 40amp and 2 are 20 amp. there is juice going to the 40amp and juice going to only one 20amp the second 20 amp there is no piower going to it. what are the fuses for and does anyone know if the one not getting any juice is hooked somehow with the rear slide? any help in figuring out why rear slide stopped working would be appreciated.

[Ray,IN]

HWH leveling system and slide room extension, right? If yes, this pdf will allow you to ID your system model# and shows the control box W/ fuses.
This is the Winnebago-specific slide room extension service manual.

[dnrainey]

Hi, I had the same problem with my front slide while on a trip and found the problem to be a loose connection on one of the wires where it attached to the pump assembly. Wiggle wires and check to make sure all the connections are good. Also, the 40 Amp fuse is prone to overheat and burn the fuse holder up but when that happens, nothing works.