EMS Board

[Zonkpdie]

Is there a model number on the EMS board to reference to for a replacement or are they all the same board?
Zonkpdie...... it's for a 2006 Winneabgo Tour

[winnie32v]

Originally Posted by Zonkpdie

Is there a model number on the EMS board to reference to for a replacement or are they all the same board?
Zonkpdie...... it's for a 2006 Winneabgo Tour

Hummmmmmmmmmmmmmmmmmmmmm....
Why do you think that the board needs to be replaced?

It could be something simple if it is not working correctly.
Some better description of the problem may save you some time and money...lots of veteran EMS guys on this forum.
Please advise.

[Triker56]

Did you try the Test switch on the EMS?

[RonnieTucker]

You might want to check the 3 amp fuse on the Control Module first.


Ronnie Tucker

[rv rick]

I had a problem with my EMS display on a 2008 Tour -- Winnebago Tech Support suggested I turn off all power -- including the battery (I used the battery disconnect switches) on the coach for about 30 seconds. This allowed the EMS to re-set and it worked great from then on.

Hope this helps.

[monster2]

We are having trouble with our EMS as well. Where is the test switch?

[Zonkpdie]

Monster2
What year is your Coach?
What kind of problems are you having?
Zonkpdie

[monster2]

Zonkpdie
We have a 2002 Winnebago Brave. We have replaced the ems, have power out and in but still have no power to the compressors in the 2 AC's

[Zonkpdie]

Monster 2
Did you find the Test Switch on the panel?
Did Winnebago support the replacement of the EMS board?
Zonkpdie

[Zonkpdie]

Triker 56,
I couldn't find a test switch on the panel. There is a 20/30 test button.
Zonkpdie

[rdoghse]

I have a '01 Adventurer and would like to know where the test switch is. My EMS display stopped working a couple years ago. Replaced the fuse and turned off power, but still not working. Thanks.
Betty