How do you adjust the automatic jacks?

[Rudolph]

I have a 08 Vectra when I push the auto level the rear jacks raise all the way and the yellow light is still on. How and where is the adjust done? Thanks

[Rudolph]

I have a 08 Vectra when I push the auto level the rear jacks raise all the way and the yellow light is still on. How and where is the adjust done? Thanks

[AA4WP]

Not trying to be a wiseacre, but is it possible that the rear is so low that the jack has travelled as far as it can? That has happened to me with our 2004 Journey.

Just maybe.

Wendell

[Bagger97]

Read the manual. You will need to level the MH first, then reset the system following the book.

[UFO Pilot]

Do you know the brand of levelers? On my Kwikee levelers I level manually and then reset the system. There should be a reset procedure outlined in the leveler manual.

[Rudolph]

I am in my shop on concrete floor. After the rear is all the way up the yellow light is still on. It is HWH computerized leveling. I can not find how to adjust it in the manual.

[UFO Pilot]

Here is a previous thread on this:

[phays]

I've got a '98 Vectra with HWH 610 Series jacks. Probably not the same as yours but the Operators Manual I have has very brief instructions.

Essentially you level the coach, then adjust one, or more, of the 3 sensing unit mounting screws until all yellow lights are off. The drawing shows springs around these screws but does not say where the unit is located.

I'd call HWH. From everything I've read on this forum, they are eager to help you.

pete