I may get busy this morning, dealing with water heater prob. But I can start to chase out the details of the wiring as time allows.
First stop I find is power to the mirror control switch comes in on a wire labeled MD.
![Click image for larger version
Name: wire ID.jpg
Views: 23
Size: 30.2 KB
ID: 188823](https://www.winnieowners.com/forums/attachment.php?attachmentid=188823&thumb=1&d=1714050461)
This chart to decode the ID
https://www.winnebago.com/Files/File...ical_guide.pdf
Click these snips to see better!
Using this diagram for info:
https://www.winnebago.com/Files/File...ire_144984.pdf
This wire MD gets the power from a relay under the dash pod.
There should be bat, standing on LD. When the ignition is turned on, power comes to this relay on WJ pin 30 of the relay mount. That power operates the relay and closes it to pass the power coming in on LD to MD to go out toward the mirror.
So one question would be if this relay clicks/operates when the ignition is turned on?
Does bat show on WJ pin 30 of the mounting when ignition is on?
This wire LD for power also feeds other things like the aux fans. Do they work as an indication you don't need to check that fuse?
EDIT: That wire LD also has to do with the radio power. Does the radio seem to work on both chassis battery and coach when you flip that dash switch?