<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by CalTex:
I thought I would add this to the thread just in case someone else has the same problem. The keypad on my Vectra wouldn't work although all the key fobs did. Dealer fix was to scrape the paint off the contacts in the connector. He said it looked like the connector was hanging outside when they painted something. It's working, at least for now. </div></BLOCKQUOTE>
My fobs work the compartment locks,but neither the fobs or the keypad will "operate" the lock.
Evan has given the location of the little box and I have the instructions...
It's raining again....Gosh I hate this time of year!
Sounds like your fobs are correctly programmed if the marker lights flash. Check the door sill connections.
There are some spring loaded connections between the front edge of the door and the sill at the hinge. These touch when the door is closed to provide signal to the lock solenoid inside the door. Mine occaisionally get dirty or the seal sometimes interfers.
Linear Mode
