I have a Digital Alarm made by JRV Industries in the bedroom of out coach. One of my grandkids, while playing in the coach switched the clock to a 24 hr day, and I can't switch it back. I searched through the Winnebago brief case of manuals, but this item is not included. Does anyone know how to switch back to 12 hr AM/PM mode?
I have a Digital Alarm made by JRV Industries in the bedroom of out coach. One of my grandkids, while playing in the coach switched the clock to a 24 hr day, and I can't switch it back. I searched through the Winnebago brief case of manuals, but this item is not included. Does anyone know how to switch back to 12 hr AM/PM mode?
Most digital clocks (etc.) require that you push two buttons simulataneously (sometimes for a couple of seconds) to enter a set-up mode ...
Try that ... if that doesn't work have you thought about locking the same grandkid in the bathroom with the clock and not let him/her out until they get the clock back the way it was ... {just kidding}
i had the same problem..i believe you remove the power to it and when you re-power it resets correctly..i'll see if i made any notes in case this doesn't work..jim
The alarm clock in my 2001 Journey is the most difficult to set of any I have used. I will look and see if it is the same and I will check the instructions for the 24 to 12 changeover
Jim, thanks for your tip. It worked as you said. Power off, power on and it was back to normal.I still can't determine how one would switch from 12 to 24 hrs or vice versa.
Linear Mode
