Disappearing TV removal

[creativepart]

Here’s what I’ve found… yes Winnebago makes its own mounts. But not TVs. So the mounts they make match up to the mounting holes on TVs. For me, all I had to find is a generic mount that I could attach to the Winnebago mount and then use that mount to attach to a new TV.

I didn’t do this with a Televator TV, so maybe there’s not enough room for two mounts. But the holes on the TV are standard so use that to adapt everything to work with the Winnebago mount.

[R2D2]

Yeah, it would be different if mine was a wall mount, but since it comes up out of a cabinet that's where the problem lies. There is less than an inch of clearance from the front of the tv to the edge of the opening. So adding another plate would be in excess of the clearance. Knowing all of this now, I may have elected to get a new Samsung instead. But there's no guarantee that it would bolt up like the old tv.

Interestingly, I thought all tv's used a standard attachment pattern, but this Toshiba is definitely different.

[creativepart]

TVs do have standard mounting holes, but there are different hole patterns for different sized TVs.

[R2D2]

All I can say about that is that both tv's are 43". The top two holes align with the plate, but the bottom holes do not by a couple inches. If I use the bottom two holes to mount then the top two don't align.