my two receptacles one on the dinette on the slide and the lavatory. I have power at the breaker but it doesnt get to the above receptacles. Only these two receptacles on this circuit. any suggestion? thanks! I did look at the winnebago elec drawings and I can't make heads or tails. My unit is 30 amp and the drawing for 2005 voyge 33V show 50 amp
my two receptacles one on the dinette on the slide and the lavatory. I have power at the breaker but it doesnt get to the above receptacles. Only these two receptacles on this circuit. any suggestion? thanks! I did look at the winnebago elec drawings and I can't make heads or tails. My unit is 30 amp and the drawing for 2005 voyge 33V show 50 amp
According to the wiring diagram for your coach Body, 110 Volt Wiring Diagram the dinette and lavatory receptacles are controlled by a GFI outlet in the hallway.
I had a similar problem with the receptacles on my slide. The GFI tested fine. Found that I had a loose wire in a junction box under the slide. It wasn't too easy to get to, but I was able to get the wire back in the wire nut.
Same thing happened to me but I called Coachnet and they mentioned it to me. Those GFI's are the same color as the cover plate so I didn't notice them until that happened.