Onan Generator Problem - RVGQ400 Series

[walleyejim]

During the past month I had a mouse chew the black wire and removed portions of the insulation on the red wire of the Fuel Cutoff Solenoid. I have attempted to splice the black wire and taped the red one, however the generator will now not prime or start. The engine will turn over from both the the remote and the starter switch on the generator.

I have been unable to locate any fuses that might be associated with the fuel cutoff solenoid or any fuses or breakers that deal with the generator at all. My unit is a 2012 Access, Model WF224V.

My question is does anyone know the location of any fuse or breaker that may be keeping the unit from priming and running? The house cutoff switch does shut off the power to the generator, but I just do not see any fuse or breaker for the generator.

[walleyejim]

Problem has been solved. Fuel pump wires were also cut by the mice. Never did locate any fuses or breakers for the generator parts - guess there are not any.

[BirchyBoy]

I’m glad you got it.

[T5miami]

Thanks for following up with the post for the rest of us.