Replacing lighted rocker switch for 110v water heater

[Katy2]

I have a 2009 Winnebago View. The light in the rocker switch for the Atwood electric water heater, doesn’t work. The heater seems to work, but without the light I am worried about forgetting to turn it off. I did replace this a couple of years ago, but the dealer can no longer find the part.
Made by American Technology Components. Mine is brown, but colour doesn’t really matter. MDI- ABS-098. (could be MOI. Hard to read).
I called the company but they have not yet responded.
Any ideas as to where I might find one?
Katy 2

[bigb]

What you need is a pilot switch and if you don't hear back from the manufacturer we can help you locate one if you give us a pic and the ratings off the back of the switch, and possibly the measurements. We need to know the ratings because it could be switching the entire load or just a relay which is a fraction of the load, and we don't know if it is 12 or 120 volts. Many are a 12 volt pilot switch that energizes a relay that in turn energizes the 120 volt element.

[Morich]

We might need to get down to the real details on which model and floor plan you have but the switch is likely to be a somewhat common item.
This is a link to one discusion of the switch and might be correct info if looking the same.

https://www.winnieowners.com/forums/...ch-343717.html

General part number for the 2009 view seems to be 135740-06-cht but that is prone to change over time as they get different suply.

[Ray,IN]

Bigb is right, take a picture of the side of the switch with the specs, zoom-in to plainly see that and post that please.
I did that, then searched the web for those numbers and found a match.

[be happy]

I am in need of the same type of switch for my 07 Meridian. I called the good folks at Lichtsinn RV and the person in parts knew right away what the switch was and said they have in stock. Give them a call.

https://www.lichtsinn.com/.