2013 Vista 30T LCI Jack problem

JimA7489 · 03-25-2019, 04:03 PM

2013 Vista 30T 2500 miles
Just came back from a short trip and now the jacks will not auto level. They did ok when camping last few days.
I do have one jack light lit on the dash as if it was down but it isn't. I think this might be preventing auto level and manual leveling. Is there a way to reset the unit ??
The one light for the left has occasionally stayed on before when retracted but always went out after turning the RV off and on. Now the dash light indicated the jacks are down is also on.
Always something.
Thanks
Jim

Winterbagoal · 03-25-2019, 06:24 PM

I just did an internet search on "LCI Jacks Resetting Procedure" and got plenty of hits.

Try it.
Also make sure parking brake is set and engine is running, before trying to use levelers.

powercat_ras · 03-25-2019, 08:17 PM

My 2015 Vista has LCI jacks and the manual is in the suplemental manuals book, I had mine go into an error state and have had to reset it once. As Winterbagoal says, always level with the engine running, transmission in park, and parking brake set. You want engine running so you have 13 + Volts DC when using the levelers, the extra voltage = more power and makes the LCI levelers less likely to throw an error.