Quote:
Originally Posted by Morich
You've checked the voltage and found it a bit low but then it takes both an in and an out, so did you check the ground for the circuit?
Swapping bulbs and using one that you know works is always a good idea.
|
Hi Morich, thank you for the reply. I went back and checked a few things again and found the vintage was even lower after playing around earlier.
Anyway I decided to take the back camera cover off and was able to grab on to the connectors and found one of the barrel connectors wasn’t crimp properly. So I remade the connection and it worked just fine.
As they say” the easiest is always where you check first”
Thanks
Phil