Problem with Rubber Eraser Decal Remover

[iezzif]

I used a S SATCO rubber wheel to remove graphics from the side of my Itasca. Comes off fast, but left areas of tan residue/staining on the white finish. Did not come off with Acetone. Any suggestions on how to remove it?

[Eagle5]

Try a small test area with Mineral Spirits. Wait for a day to see if this further damages the area, or if the original finish can withstand that solvent too.
Eagle5

[Horse54]

I agree with mineral spirits. You may also try an adhesive remover such as Goo Gone.

[Lov2roam]

Been there, done that. Use 3M adhesive remover and if that doesn’t work, use Graphx off if on fiberglass. Then use a good marine polish wit a buffer.

[GotUr6]

Be careful with goo gone. It can remove the finish on you fiberglass. I’ve “been there done that” and learned the hard way.

If the residue is not tacky, a good marine polish and a buffer will do the job.