slide out will not go out

[aries4956]

can someone please tell me location of the slide out control box for a 2019 winnebago intent 31p

[Morich]

Picked this info off the parts catalog here:
https://catalog3d.winnebagoind.com/menu/Parts.htm

This drawing shows it in yellow as being in what seems to be the first compartment. Mounted up on the "ceiling" but under a cover.

[Divelement]

If its like my Via , it's behind an outlet so you have to be real low and looking almost straight up to see it. Good luck.

[Upinsmoke]

I accidentally discovered one of mine recently. I was installing a "can caddy" on what I thought was a compartment wall and turned out to be a panel installed in the compartment to shield/hide the controller. Winnie should really mark these locations as it was only dumb luck that I didn't drill into it.

Also, I also refer to my compartments as L & R (sitting in the driver's seat) so the first one behind/under the driver is L1, second is L2 etc., and same on the right side. This leaves no question as to which compartment is being discussed.

[Bo Walker]

aries4956, this happened to me as well. I don't know what I did, but, maybe the engine was running, or, the ignition switch was off, or, not in neutral or some simple something. Check all you can before you start throwing parts. Refer to your owners manual.
Please let us know what you did to correct the problem.

Good Luck