EQ System Leveler Issue 2021 View 24V

[RLCASC]

2021 View 24V.
Problem: After fully retracting the levelers, the left front leveler starts a slow downward movement. At first thought it might possibly be an air or fluid leak, causing it to drift down. Placed a strong bungee around base plate, then anchored to frame to prevent this drift, only to realize that the cylinder was still under pressure, forcing it to lower slowly. Bungee didn’t even slow descent. The retract button can be pressed, leveler will return to retracted position, but immediately start downward again.
Parked MH on fairly level driveway. Pressed Auto level, after leveling complete, left for 24 hours to see if system would preform correctly. It held. But upon retracting, left front would not stay up. Any insight as to what could be causing this would be highly appreciated.