![Reply](/forums/images/winne/buttons/reply.gif) |
|
06-17-2020, 09:48 AM
|
#21
|
Winnie-Wise
Join Date: Jul 2019
Location: Rochester, MN
Posts: 452
|
Quote:
Originally Posted by tinglett
And honestly, I'm not entirely sure what HAPS is.
|
To answer my own comment, I found HAPS is Hazardous Air Polluting Solvent ![Smile](https://www.winnieowners.com/forums/images/smilies/smile.gif) .
Looks like both are intended for EPDM. Maybe it was ok it bubbled? Also, I should point out that I ordered one fan and installed it and liked it so much I ordered the second fan. That worked out fine other than the wait.
|
|
|
06-17-2020, 10:15 AM
|
#22
|
Winnebago Master
Join Date: Jan 2020
Posts: 1,354
|
Quote:
Originally Posted by tinglett
T Also, I should point out that I ordered one fan and installed it and liked it so much I ordered the second fan. That worked out fine other than the wait.
|
I was planning that anyway, just to see how the first goes!
Was it maybe too hot when you installed the leveler?
__________________
2019 2106 DS
2019 Colorado Duramax
|
|
|
06-17-2020, 02:14 PM
|
#23
|
Winnebago Camper
Join Date: Jun 2020
Posts: 13
|
Not sure what I may have done wrong. It's almost like there was some off-gassing under the lap sealant causing it to bubble. I don't think the Butyl tape, which i also used was to blame, It was a 65 degree day in the sun--so I don't think temperature was the cause. Most of bubbles retracted back somewhat as it cured, but a few especially over the screw head remain high.
I've since had it rain several times, with no leaks so I'm just going to leave it as is with frequent inspections.
Still, I feel like i must have missed a step or used a wrong product. If the bubbles pop, I will just cut them open and fill them back with more sealant.
|
|
|
07-05-2020, 07:46 PM
|
#24
|
Winnebago Camper
Join Date: May 2020
Posts: 27
|
Maxair Fan Question
We love the idea of installing a Maxair Fan where our standard ceiling air vent is above our murphy bed in our 2108DS 2020. But our ceiling is different than what the photos posted show, so we were wondering if anyone had any thoughts about if an install will work with our different ceiling "layout" as shown in the attached photos.
[ATTACH] ![Click image for larger version
Name: ceiling1.jpg
Views: 113
Size: 206.3 KB
ID: 174154](https://www.winnieowners.com/forums/attachment.php?attachmentid=174154&thumb=1&d=1593999929) [/ATTACH]
|
|
|
07-06-2020, 05:18 AM
|
#25
|
Winnebago Owner
Join Date: Sep 2017
Location: Maine
Posts: 136
|
My 2108DS (2018) does have a little different layout. Still, if you remove the trim on the existing vent you'll probably be able to see what's up there that might be in the way. I just ran speaker wires from the stereo to the bed ceiling, first look it didn't seem possible, but once I removed all the covers and grills on the ceiling, I found a route that worked. I'm thinking the same approach should work for you. I had my MaxAire installed by the dealer, he picked up power from the light next to it. We do like ours, its a great improvement!
|
|
|
07-06-2020, 06:55 AM
|
#26
|
Winnie-Wise
Join Date: Jul 2019
Location: Rochester, MN
Posts: 452
|
Wow...that does look quite a bit more tricky. When you remove the trim (it unscrews easily and can be put back easily) I think you'll find the 14" square is framed in wood...so you can't really see anything.
Looking at your photo, I see an air duct on either side and I think those are your LED ceiling lights further toward the TT sides, right? On the plus side, the ceiling framing goes side to side. The air ducts will get in the way, but I doubt they extend further forward than a few inches beyond the vents, so you are probably ok drilling a small hole in the side of the vent framing toward the target LED light so long as you make sure this hole is forward of the air duct.
The hard part will be fishing the wire. I'd get a fish tape from the electric dept of your home center rather than try to use a coat hanger or similar. Drill the hole a little extra big (maybe 1/2") and with the LED light removed and dangling, see if you can swish the fish tape back and forth over the hole. You'll need a second pair of eyes for that. If you can do that, you've got it. It's just a matter of catching the tape with a hook made of stiff wire. Persist and you'll get it. If you run into some obstruction or too much frustration, you can always put the LED light back in place and put the vent trim back on. No harm done.
Todd
|
|
|
07-06-2020, 07:14 AM
|
#27
|
Winnie-Wise
Join Date: Jul 2019
Location: Rochester, MN
Posts: 452
|
BTW, I shouldn't really discourage use of coat hanger wire or a length of some heavier solid core wire. The distance is only about 3 feet, but I think you are going to need to bend a little curve to it. Fish tape naturally has a curl to it as it's made of spring steel wrapped in a reel, but you can do the same with wire easily enough. Experiment a little and I bet you'll be successful.
You are going to love that fan when it's in place and working!
Todd
|
|
|
08-12-2021, 08:23 AM
|
#28
|
Winnebago Camper
Join Date: Aug 2021
Posts: 5
|
followup
Quote:
Originally Posted by nm3ca
Hi,
I am considering the electric MAXXFan deluxe for the front vent over the best in my 2018 1700BH.
Does anyone know if the LED light circuit has the required 12v 5amp capacity?
I realize many of you had the dealer install, however I suspect available power came up in the discussion?
Thanks in advance,
Ned.
|
Have same question. What did you find out?
|
|
|
08-12-2021, 08:31 AM
|
#29
|
Winnie-Wise
Join Date: Jul 2019
Location: Rochester, MN
Posts: 452
|
I've had mine installed for quite some time and have yet to blow a fuse. I don't typically blast it at full speed (highest amps), but I have run it at full speed to run down my battery for testing. I'm pretty sure I turned all the lights on too. I doubt you are going to have a problem.
Hopefully your 2018 is similar to the 2019 for position of the closest light. It was really easy to wire it up. I haven't heard how difficult it is in the newer models where the lights are shifted away from the vent. Just trickier wire fishing, I imagine.
__________________
Todd
2019 Micro Minnie 2108DS with upgrades and mods here
2020 Toyota Land Cruiser, RedArc TowPro-Elite, Andersen 3380 WDH
|
|
|
08-12-2021, 03:52 PM
|
#30
|
Winnebago Camper
Join Date: May 2021
Posts: 44
|
I just finished installing a Fantastic Fan (model 7350) in our 1708FB. No issues with removal of the non-powered vent in the dinette/kitchen area, installation, and wiring of the Fantastic Fan. I used Dicor self-leveling sealant on the roof.
Looking forward to air coming in the windows at night!
|
|
|
10-20-2021, 04:35 PM
|
#31
|
Winnie-Wise
Join Date: Oct 2021
Location: Abbotsford, BC
Posts: 442
|
Quote:
Originally Posted by tinglett
And here are those remaining 3 photos. The first is the dangling wires from the light being pulled out. The second and third are inside the ceiling. You can see my wire through the wood that surrounds the vent opening, and you can see the wires that Winnebago routed to the light. Those wires are heading over to the door on the street side.
Todd
|
Am I correct to assume there is power to the light (before light switch) at all times.
|
|
|
10-20-2021, 07:49 PM
|
#32
|
Winnie-Wise
Join Date: Jul 2019
Location: Rochester, MN
Posts: 452
|
Quote:
Originally Posted by Bcborn
Am I correct to assume there is power to the light (before light switch) at all times.
|
I can confirm this is true for the 2019 2108DS. Not sure about other years and models. Mine only has a single light that is driven by the wall switch, and that's a different light than the one I wired the fan into.
__________________
Todd
2019 Micro Minnie 2108DS with upgrades and mods here
2020 Toyota Land Cruiser, RedArc TowPro-Elite, Andersen 3380 WDH
|
|
|
![Reply](/forums/images/winne/buttons/reply.gif) |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|